ROOK MK1 3D printer By LDO Motors
$96.59
Free shipping within 3 days
Easy returns within 30 days
Shopping information security
LDO Motors ROOK MK1 3D printer Kit
After more than a year working directly with the Rolohaun3d team LDO is ready to release its Rook Mk1 DIY printer kit. This Kit comes with All the hardware and electronics needed to assemble this printer and only requires Printed parts and typical tools to build a printer. All wires are terminated to length and there is an excellent guide to building it by Kanrgo87 here.
Parts you need to source:
- printed parts – Available here
- Miscellaneous tools for assembly
Parts included in the kit:
| Box | Item | Qty. |
| Motion & Fasteners | Zip Tie | 20 |
| Open Belt, 2GT, 6mm, 4m | 1 | |
| Pulley, 2GT, 20T, (5mm ID 6mm W) | 3 | |
| Bearing, F695-2RS | 20 | |
| Linear Bearing, 8x15x45mm | 2 | |
| Rubber Foot, 4x32x22mm | 4 | |
| Bowden Tube (length 1/2 meter) | 1 | |
| Machine Screw, BHCS, M2.5×4 | 4 | |
| Machine Screw, BHCS, M2x10 | 2 | |
| Machine Screw, BHCS, M2x12 | 2 | |
| Machine Screw, BHCS, M3x5 | 4 | |
| Machine Screw, BHCS, M3x6 | 24 | |
| Machine Screw, BHCS, M3X10 | 44 | |
| Machine Screw, BHCS, M3X12 | 6 | |
| Machine Screw, BHCS, M3x16 | 17 | |
| Machine Screw, BHCS, M3x18 | 4 | |
| Machine Screw, BHCS, M3x20 | 8 | |
| Machine Screw, BHCS, M3x30 | 5 | |
| Machine Screw, BHCS, M3x40 | 8 | |
| Machine Screw, BHCS, M5x16 | 24 | |
| Machine Screw, BHCS, M5x25 | 9 | |
| Machine Screw, BHCS, M5x30 | 7 | |
| Nut, M3 | 100 | |
| Shim Washer, M5X10X1mm | 32 | |
| M3x4x5 Heat set Inserts for Rookery Toolhead | 2+3 | |
| M3x8x5 Heat set Inserts for Rookery Toolhead | 13 | |
| Set Screw, M4x4, Pre-applied Thread Lock | 8 | |
| Electronics | TMC2209 | 4 |
| SD Card, 32GB | 1 | |
| Wire Sleeve (length 1 meter) | 1 | |
| Cable Kit | 1 | |
| Linear Rail Kit | Linear Rail SLR9C, 200mm LDO-SLR9C-1R-200Z0 | 2 |
| Linear Rail SLR9C, 150mm LDO-SLR9C-1R-150Z1 | 1 | |
| Linear Rod, 8x200mm | 4 | |
| Build Plate & Parts | Aluminum Build Plate, 120x120mm | 1 |
| PI Film Heater (Installed), 24VDC 100W, w/ Thermal Fuse | 1 | |
| Heater Cover Plate (Installed) | 1 | |
| Spring Steel Flex Plate, 120x120mm, Textured | 1 | |
| Magnetic Pad, 120x120mm | 1 | |
| Die Springs, Yellow, 8x4x20mm | 3 | |
| Knurled Nut, M3 | 3 | |
| Motor Kit | Motor E, LDO-42STH25-1004AC, 50cm cable | 1 |
| Motor Z, LDO-42STH40-1684AC(RSS), 20mm cable | 1 | |
| Motor XY, LDO-42STH48-2504MAC(F), 50cm cable | 2 | |
| Other | LDO MK1 PSU, EA11811K-240 | 1 |
| Other | Triangle-lab DDB Extruder | 1 |
| Other | Triangle-labTR6 Hot end Ceramic Heating Core Model B | 1 |
| Other | BTT Manta M4P V2.2 | 1 |
| Other | BTT CB1 V2.2 | 1 |
| Other | C13 Power Cord (Make sure to get the right type plug for your conuntry) | 1 |
Specifications:
Model LDO-MK1
Construction Core XY
Printing Size 110x110x110mm
Mother Board BTT M4P with TMC2209
Pi Board BTT CB1
Bed Temp 110ºC MAX
Compatible Filament Size 1.75mm
Hot end Triangle lab TCHC TR6 Hot end Ceramic Heating Core Model B
Printing Speed 150~200mm/s
Power Supply Brick PSU 200W with necessary certifications (UL, CUL, TUV, CB,
CE, FCC, UKCA)
Motors LDO MK1 Motor Kit, with slow dropping Z motor
Firmware Klipper
Printer External Size 220x275x370mm after assembly
Packing 350*350*170mm, Gross 5.5Kg/Kit
Be the first to review “ROOK MK1 3D printer By LDO Motors”
Related products
Reviews
There are no reviews yet.